TRAINER KITS

Model:FLO-85

Experiments like:

Addition, Subtraction, Multiplication & Division [8/16/Multi/BCD]BITS Search, Block Move, Largest/Smallest , Array Sorting(Ascending/Descending, Reversing),Code Conversions, Squares & Square roots & Interfacing experiments.

 

Read More

 

FLO-85 Trainer kit is equipped with

  • CPU               –  8085
  • ROM              –  8K
  • RAM              –  8K  with Battery Back-up
  • I/O Interface –  24  with 8255 & 26 pin FRC
  • KBD Interface –  24  Hex keys & 6 Digit 7 seg LED Display  with 8279
  • IN-Built Power- 5V,1.5 amp; 12-0-12 V, 0.5 amp
  • Fully covered MS Box

Model:FLO-86

Experiments like:

Such as : Addition, Subtraction, Multiplication & Division [8/16/Multi/BCD]BITS Search, Block Move, Largest/Smallest, Array Sorting(Ascending/Descending, Reversing),Code Conversions, Squares & Square roots & Interfacing experiments.

 

Read More

 

FLO-86 Trainer kit is equipped with

 

  • CPU –  8086
  • ROM –  8K
  • RAM –  8K  with Battery Back-up
  • I/O Interface –  24  with 8255 & 26 pin FRC
  • KBD Interface –  24   Hex keys & 8 Digit 7 seg LED Display  with 8279
  • IN-Built Power- 5V,1.5 amp; 12-0-12 V, 0.5 amp
  • Fully covered MS Box

Model:FLO-51

Experiments like:

Such as : Addition, Subtraction, Multiplication & Division [8/16/Multi/BCD]BITS Search, Block Move, Largest/Smallest, Array Sorting(Ascending/Descending, Reversing),Code Conversions, Squares & Square roots & Interfacing experiments.

 

Read More

FLO-51 Trainer Kit is equipped with

 

  • CPU –  8051
  • ROM –  8K
  • RAM               –  8K  with Battery Back-up
  • I/O Interface –  24  with 8255 & 26 pin FRC
  • KBD Interface –  24  Hex keys & 8 Digit 7 seg LED Display  with 8279
  • IN-Built Power- 5V,1.5 amp; 12-0-12 V, 0.5 amp
  • Fully covered MS Box

 

INTERFACE KITS

Model:DAC0800

This DAC Interface using IC-0800 provides the option of verifying the behavior of the DAC operation  either manually  using a DIP switch or sending a digital data through microprocessor . Also to write suitable programs to generate different wave forms :- such as Square, Rectangle, Positive Ramp, Negative Ramp, Triangular wave, UP/DN Staircase wave, Sine wave etc.- through the o/p pin provided .

Model:DAC0804

This ADC Interface using IC-0804 is a Single Channel ADC. It  provides the facility to vary the Analog Input  manually and  observe the  Digital output at the Data Field of the micro processor Kit by storing  a suitable program and executing it.   

 

Model:DAC0809

This ADC Interface using IC-0808 is an Eight Channel ADC. It  provides the facility to select the required 1 of 8 Channels using a DIP Switch and vary the Analog Input  manually and  observe the  Digital output at the Data Field of the micro processor Kit by storing  a suitable program and executing it.   

 

Model:KBD

This Interface provides 16 numbers of HEX keys  arranged in 4×4 matrix and  a 7SEG LED Display. Writing a suitable program and executing it enables one to  identify the key pressed and displaying its equivalent HEX value in the 7 SEG LED Display.

An extra provision is also provided at extra cost to have 4 nos of   7 SEG LED displays and to display a 4 bit Hex Data by executing a suitably modified program

 

Model:DMD

This Interface provides 8 Digit 7SEG LED display devices  to display a Dynamic Message  by executing a suitable program. By arranging different Hex codes in the Look up memory space different messages can be displayed.

 

Model:825510

This I/O Study board Interface helps one to design the PORTS A,B,C(upper), C(Lower) of IC 8255 to either as  input port or as an output port manually by using jumpers accordingly. Then write suitable programs to input data through the designated input ports and display the digital data in the designated output ports .

Also write appropriate programs to generate different Counter operations such as :-  4/8 BIT Ring Counter, Shift Counter, Binary counter, Decade counter, Modulus counter, UP/DN counter

 

Model:TRAFFIC

This Interface provides facility to study the Traffic Signal Lights control at a  4- Road Junction employing 28 LEDS and all the three ports of 8255. Each LED is assigned to a fixed pin of one of the three ports and by storing the Hex data for the control of 24 leds in a lookup table and executing a suitable program the required Traffic Regulation can be achieved.

Different schemes with different Timings increases the versatility of the interface kit

 

Model:STEPPER

This Interface provides the Hardware necessary for driving the 4 Step Stepper Motor to rotate 360 degrees in 200 steps and is capable of rotating in Clockwise direction or in Anti clockwise direction depending upon the two sets of 4 Bytes of Hex Data stored in a particular sequence .

Similarly the Clockwise Rotation/Anti clockwise Rotation of the shaft for 360 degree rotation or rotation for a required angle can also be achieved. By rotating through 180 degrees Clockwise followed by 180 degree rotation in Anti clockwise direction yields Wiper action.

 

Model:FRC